week15_02161141陳筱瑀

畫出兩個顏色的茶壺，可用鍵盤做出移動旋轉

#include<GL/glut.h>
#include<stdio.h>
float x1=-0.4, y1=0, x2=0, y2=0, angle=0;
void display()
{
    glEnable(GL_DEPTH_TEST);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    glPushMatrix();
        glTranslatef(x1, y1, 0);
        glRotatef(angle, 0,0,1);
        glTranslatef(-0.25, -0.11, 0);
        glColor3f(1,1,0);
        glutSolidTeapot(0.2);
    glPopMatrix();
    glPushMatrix();
        glTranslatef(x2, y2, 0);
        glColor3f(1,0,0);
        glutSolidTeapot(0.2);
    glPopMatrix();
    glFlush();
}
void keyboard(unsigned char key, int x, int y)
{
    if(key=='1') x1+=0.1;
    if(key=='2') x1-=0.1;
    if(key=='3') y1+=0.1;
    if(key=='4') y1-=0.1;
    if(key=='5') angle+=10;
    if(key=='6') angle-=010;
    printf("%f %f\n", x1, y1);
    glutPostRedisplay();
}
int main(int argc, char **argv)
{
    glutInit(&argc, argv);
    glutCreateWindow("Robot3D");
    glutDisplayFunc(display);
    glutKeyboardFunc(keyboard);
    glutMainLoop();

}

分別可以控制單一個茶壺旋轉或兩個同時一起

#include<GL/glut.h>
#include<stdio.h>
float x1=-0.4, y1=0, x2=0, y2=0, angle=0, angle2=0;
void display()
{
    glEnable(GL_DEPTH_TEST);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    glPushMatrix();///BLUE
        glTranslatef(x2, y2, 0);
        glRotatef(angle, 0,0,1);
        glColor3f(0,0,1);
        glutSolidTeapot(0.2);
        glPushMatrix();///GREEN
           glTranslatef(x1, y1, 0);
           glRotatef(angle2, 0,0,1);
           glTranslatef(x1, y1, 0);
           glColor3f(0, 1, 0);
           glutSolidTeapot(0.2);
       glPopMatrix();
   glPopMatrix();
   glFlush();
}
void keyboard(unsigned char key, int x, int y)
{
    if(key=='1') x1+=0.1;
    if(key=='2') x1-=0.1;
    if(key=='3') y1+=0.1;
    if(key=='4') y1-=0.1;
    if(key=='5') angle+=10;
    if(key=='6') angle-=010;
    if(key=='7') angle2+=010;
    if(key=='8') angle2-=010;
    printf("%f %f\n", x1, y1);
    glutPostRedisplay();
}
int main(int argc, char **argv)
{
    glutInit(&argc, argv);
    glutCreateWindow("Robot3D");
    glutDisplayFunc(display);
    glutKeyboardFunc(keyboard);
    glutMainLoop();

}

用鍵盤控制手臂關節的轉動，記得將打光註解掉才能看到顏色

#include <GL/glut.h>
float angle=0, angle2=0, angle3=0, angle4=0, oldX=0, oldY=0;
void keyboard(unsigned char key, int x, int y)
{
    if(key=='1') angle++;
    if(key=='2') angle2++;
    if(key=='3') angle3++;
    if(key=='4') angle4++;
    if(key=='5') angle--;
    if(key=='6') angle2--;
    if(key=='7') angle3--;
    if(key=='8') angle4--;
    glutPostRedisplay();
}
void drawBody(){
    glPushMatrix();
    glScalef(1, 0.5, 0.5);
    glutSolidCube(1);
    glPopMatrix();
}
void drawArm(){
    glPushMatrix();
    glScalef(0.6, 0.3, 0.3);
    glutSolidCube(1);
    glPopMatrix();
}
void display()
{
    { ///Lighting
    glColor3ub(166,132,100);
    GLfloat pos[]={0, 0, -1, 0};
    glLightfv(GL_LIGHT0, GL_POSITION, pos);
    glEnable(GL_LIGHT0);
    //glEnable(GL_LIGHTING);
    glEnable(GL_DEPTH_TEST);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    }
    glPushMatrix();
        glTranslatef(0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(angle, 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Right Upper Arm
        glPushMatrix();
            glTranslatef(0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(angle2, 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 0);
            drawArm(); ///Right Lower Arm
        glPopMatrix();
    glPopMatrix();
    glPushMatrix();
        glTranslatef(-0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(-angle3, 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Left Upper Arm
        glPushMatrix();
            glTranslatef(-0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(-angle4, 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 1);
            drawArm(); ///Left Lower Arm
        glPopMatrix();
    glPopMatrix();
    drawBody();
    glFlush();
}
void motion(int x, int y)
{   angle -= y - oldY;
    oldY=y; oldX=x;
}
void mouse(int button, int state, int x, int y){
    if(state==GLUT_DOWN) { oldX=x; oldY=y; }
}
void timer(int t)
{
    glutTimerFunc(20, timer, t+1);
    //angle++;
    glutPostRedisplay();
}
int main(int argc, char**argv)
{
    glutInit(&argc, argv);
    glutCreateWindow("T-R-T test");
    glutDisplayFunc(display);
    glutTimerFunc(20, timer, 0);
    glutMouseFunc(mouse);
    glutMotionFunc(motion);
    glutKeyboardFunc(keyboard);
    glutMainLoop();
}

滑鼠搭配鍵盤控制，使手臂關節可以轉動

#include <GL/glut.h>
float oldX=0, oldY=0; //angle=0, angle2=0, angle3=0, angle4=0;
float angle[10]={0,0,0,0,0,0,0,0,0,0};
int now=0;
void motion(int x, int y)
{   angle [now] -= y - oldY;
    oldY=y; oldX=x;
}
void keyboard(unsigned char key, int x, int y)
{
    if(key=='1') now=1;
    if(key=='2') now=2;
    if(key=='3') now=3;
    if(key=='4') now=4;
    glutPostRedisplay();
}
void drawBody(){
    glPushMatrix();
    glScalef(1, 0.5, 0.5);
    glutSolidCube(1);
    glPopMatrix();
}
void drawArm(){
    glPushMatrix();
    glScalef(0.6, 0.3, 0.3);
    glutSolidCube(1);
    glPopMatrix();
}
void display()
{
    { ///Lighting
    glColor3ub(166,132,100);
    GLfloat pos[]={0, 0, -1, 0};
    glLightfv(GL_LIGHT0, GL_POSITION, pos);
    glEnable(GL_LIGHT0);
    //glEnable(GL_LIGHTING);
    glEnable(GL_DEPTH_TEST);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    }
    glPushMatrix();
        glTranslatef(0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(angle[1], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Right Upper Arm
        glPushMatrix();
            glTranslatef(0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(angle[2], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 0);
            drawArm(); ///Right Lower Arm
        glPopMatrix();
    glPopMatrix();
    glPushMatrix();
        glTranslatef(-0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(-angle[3], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Left Upper Arm
        glPushMatrix();
            glTranslatef(-0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(-angle[4], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 1);
            drawArm(); ///Left Lower Arm
        glPopMatrix();
    glPopMatrix();
    drawBody();
    glFlush();
}

void mouse(int button, int state, int x, int y){
    if(state==GLUT_DOWN) { oldX=x; oldY=y; }
}
void timer(int t)
{
    glutTimerFunc(20, timer, t+1);
    //angle++;
    glutPostRedisplay();
}
int main(int argc, char**argv)
{
    glutInit(&argc, argv);
    glutCreateWindow("T-R-T test");
    glutDisplayFunc(display);
    glutTimerFunc(20, timer, 0);
    glutMouseFunc(mouse);
    glutMotionFunc(motion);
    glutKeyboardFunc(keyboard);
    glutMainLoop();
}

存檔用

#include <GL/glut.h>
#include <stdio.h>///存檔用
FILE *fout = NULL;///存檔用的 file for output

float oldX=0, oldY=0; //angle=0, angle2=0, angle3=0, angle4=0;
float angle[8]={0,0,0,0,0,0,0,0};
int now=0;
void motion(int x, int y)
{   angle [now] -= y - oldY;
    oldY=y; oldX=x;
    if(fout==NULL) fout=fopen("a.txt", "w+");
    for(int i=0;i<8;i++){
        fprintf(fout, "%.1f\t", angle[i]);
    }
    fprintf(fout, "\n");
}
void keyboard(unsigned char key, int x, int y)
{
    if(key=='1') now=1;
    if(key=='2') now=2;
    if(key=='3') now=3;
    if(key=='4') now=4;
    glutPostRedisplay();
}
void drawBody(){
    glPushMatrix();
    glScalef(1, 0.5, 0.5);
    glutSolidCube(1);
    glPopMatrix();
}
void drawArm(){
    glPushMatrix();
    glScalef(0.6, 0.3, 0.3);
    glutSolidCube(1);
    glPopMatrix();
}
void display()
{
    { ///Lighting
    glColor3ub(166,132,100);
    GLfloat pos[]={0, 0, -1, 0};
    glLightfv(GL_LIGHT0, GL_POSITION, pos);
    glEnable(GL_LIGHT0);
    //glEnable(GL_LIGHTING);
    glEnable(GL_DEPTH_TEST);
    glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
    }
    glPushMatrix();
        glTranslatef(0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(angle[1], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Right Upper Arm
        glPushMatrix();
            glTranslatef(0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(angle[2], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 0);
            drawArm(); ///Right Lower Arm
        glPopMatrix();
    glPopMatrix();
    glPushMatrix();
        glTranslatef(-0.5, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
        glRotatef(-angle[3], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
        glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
        glColor3f(0, 0, 1);
        drawArm();///這是個Arm ver 1  Left Upper Arm
        glPushMatrix();
            glTranslatef(-0.25, 0, 0);///最後一步, 把樓下的 "會對Arm Joint做旋轉的東西" 再移到右上 掛上去 ver 4
            glRotatef(-angle[4], 0,0,1);///把下面整團, 都對中間做旋轉 ver 3
            glTranslatef(-0.25, 0,0);///這是把它往右移, Arm Joint在中間 ver 2
            glColor3f(0, 1, 1);
            drawArm(); ///Left Lower Arm
        glPopMatrix();
    glPopMatrix();
    drawBody();
    glFlush();
}

void mouse(int button, int state, int x, int y){
    if(state==GLUT_DOWN) { oldX=x; oldY=y; }
}
void timer(int t)
{
    glutTimerFunc(20, timer, t+1);
    //angle++;
    glutPostRedisplay();
}
int main(int argc, char**argv)
{
    glutInit(&argc, argv);
    glutCreateWindow("T-R-T test");
    glutDisplayFunc(display);
    glutTimerFunc(20, timer, 0);
    glutMouseFunc(mouse);
    glutMotionFunc(motion);
    glutKeyboardFunc(keyboard);
    glutMainLoop();
}